LED light is actually relatively low power consumption, due to its high luminous efficiency, long life, etc., is the ideal alternative to traditional lighting in the future, and now the technology is more mature. LED lighting products in all areas. If eight hours a day lighting energy-saving lamps 12W per day is 0.096 kWh, 8 hours 3W LED lights only 0.024 kWh of electricity a day to save 0.072 degrees, annual savings of 26.28 degrees.
01, the lamp body is very small
The LED is very small, very fine chip encapsulated in transparent epoxy resin inside, so it is very small grain, very light, can save a lot of material and space in the production and application.
02, the energy consumption is very low
LED operating voltage is generally only 2 to 3.6V, the operating current as long as 0.02 ~ 0.03A. In other words: the power consumption is no more than 0.1W of power consumption than the same luminous efficiency of incandescent lamps to reduce more than 90 percent, more than 70% less than the energy-saving lamps. Therefore, only the LED can be called a real energy-saving light!
03, sturdy and durable
LED chip is completely encapsulated in epoxy. Small particles of epoxy resin is extremely difficult to smashes, no loose parts of the entire lamp body; inside the chip is extremely difficult to broke, but also a rare thermal effects which may be volatile fuse. These features make the LED i s difficult to damage. Compared to ordinary light bulbs, fluorescent lamps, LEDs can be described as impregnable, solid several times, durable countless times.
04, long service life
Appropriate current and voltage, LED service life of up to 100,000 hours, that in theory the product life of more than 10 years, is the only lamp longevity star.
05, safety low voltage
LED low voltage DC power supply (AC to DC rectifier), the power supply voltage between 6 ~ 24V, due to the different products vary. In short, it is applied safer than high voltage power supply DC power supply, especially suitable for home and public places.
06, applicable to a wide range of
Due to the small, small piece of each unit LED is 3 ~ 5mm square or round, and so more suitable for the device in the complex Preparation modeling process. For example, to create a soft, flexible tube with lights shaped snuff, only the LED is suitable.
07, richer colors
The previous single lamp color, in order to achieve a color goal, to paint or cover the surface of the light brush colored tablets, the second is filled with inert gas in the lamp light-emitting, rich colors has been limited. The LED is digital control, LED chips can be issued a variety of colors, including red, green, blue three colors, precisely because of the triad color control through the system, you can restore things in the world colorful.
08, less heat
The LED is a more advanced cold light source, unlike incandescent, fluorescent radiation, as a large number of infrared and ultraviolet rays, especially for the lighting of artifacts, jewelery, high-end cosmetics and other valuables. Almost as current incandescent thermal effect is not affected by thermal expansion and contraction of the impact of deep-fried bubble. Will not make the light bulb yellow, will not cause the lamps to accelerated aging, does not constitute a greenhouse effect on the surrounding environment.
09, less environmental pollution
LED for the protection of the environment role mainly in three aspects:
First, the hazards of metallic mercury. LED lights inside, unlike fluorescent lamps as high hazards of mercury, does not appear possible leakage of mercury ions, like public phosphor hazardous events in the bulb the manufacturing process or damaged.
Second, the epoxy manufacturer of LED are organic polymers, has good chemical and physical properties after curing, high bonding strength of the chip, metal, hard and flexible, alkali and most of the solvent and stable, not easily damaged , even if the damage or aging can also be recycling, no pollution of the environment.
Third, the particle layout of the LED lamps and displays, the light produced are generally scattered, rarely produce light pollution.
10, the cost savings
Higher than the purchase price of incandescent, fluorescent, and LED lamps. Howeve r, due to the particularly low energy consumption of the LED in the long run can save a lot of electricity, you can save the investment in changing light, and thus the cost of the integrated use of more cost-effective.
Can think about to buy an annual travel expenses and lost income spent two 12W energy-saving lamps is how much money. Ordinary energy-saving lamps which many of the hazards of harmful heavy metals.
没有评论:
发表评论